Joined: Tue Dec 25, 2012 12:34 am Posts: 31
|
Hi, I'm converting my Mk1 Fiesta to Zetec and have the 1.8 gti all in and mounted. I bought a cult ECU and engine loom and found apart from the large 12 pin oval plug nothing else plugs in. I also have a Escort Si complete loom and ecu. Most of the plugs fit with the exception of the two pin plug to the sensor in the top of the stat.I have the key and transponder ring with the small green block on the loom plugged into the transponder ring. Can anyone advise me on how to wire it into the loom. I cant seem to make head nor tail of what I wire where so need a bit of an idiots guide! Any help would be much appreciated
|
|